There Are a Few Considerations in Using an Electrical Converter With Your Violet Wand, Either When You Are Traveling Outside the US or if You Are Using a US-Made Violet Wand in Another Country.

US current voltage is 110v.  If your country has a different voltage, then of course you need a converter to change the voltage to your country.

To use a US Violet Wand outside the US, you need a 200-watt step down transformer, not a travel converter.  This type of transformer can handle the wattages required of a Violet Wand, won’t fry and won’t allow the higher current to fry your Violet Wand. 

They are available here for your convenience, but you should purchase locally to save freight as these are heavy items.

For Solid State / Electronic Violet Wands:

We recommend a 200-watt step down transformer.  You may use a travel converter of 100 watts minimum.

But you must make sure you do not hit the converter with the output of the violet wand, as that can disrupt the converter, which will damage your wand, so use of your own travel converter is at your own risk.

For TESLA Violet Wands

Disruptive discharge wands, you cannot use the small ‘travel’ converters such as you use for your electric razors etc. 

They are not built to handle the requirements and will burn out immediately, damaging your wand.

Failure to use the appropriate converter with your Violet Wand causes irreparable damage. 

We cannot be responsible for the specs of any transformers or converters other than those we supply here.  If damage is caused to your wand from unsupported converters or transformers, we will be unable to assist you with repair or service.